Installing shallow lighting in your home effectively increases the overall illumination in your living space. Shallow lighting fixtures are designed to provide even, consistent lighting throughout the room without creating shadows or glare.
They are ideal for homes with limited ceiling height, as they can be positioned closer to the ceiling. With careful planning and installation, you can use shallow lighting to create a bright environment.
This article provides a step-by-step guide on installing shallow lighting:
Step 1: Choose the Right Fixtures
First, you’ll need to choose the right shallow lighting fixtures. Look for those designed to spread the light evenly throughout the room. Opt for brighter bulbs instead of dimmer ones to light up the entire room.
Spread the shallow lights throughout the room and not just in one spot. If you have a low ceiling, place the lights closer together to provide illumination without making the ceiling look too low.
Consider whether you want dimmable lights; if so, purchase bulbs compatible with dimmer switches. Choose energy-efficient LED bulbs that can last up to 20 times longer than traditional bulbs.
Step 2: Figure Out the Placement
Evaluate the area you plan to place them in. Check the size of the room, the amount and types of furniture, the ceiling height, and the wall color. Start by measuring the height of the ceiling and the length of the walls.
This will help you determine the ideal placement for your shallow lighting fixtures. For best results, place the fixtures approximately 6 feet apart along the walls and 8 feet apart along the ceiling.
Step 3: Prepare the Placement Areas
Next, you’ll need to mark the locations for the shallow lighting fixtures. You’ll want to make sure the fixtures are level and positioned correctly.
Once you’ve marked the areas, use a drill to make the necessary holes for the fixtures.
Step 4: Connect the Wires
After that, you must connect the fixtures to the electrical wiring. Start by linking the black wire from the shallow lighting fixture to the black wire in the wall.
Then, fuse the white wire from the fixture to the white wire in the wall. Finally, interconnect the ground wire from the fixture to the ground wire in the wall.
Step 5: Install the Fixtures
Once the wiring is complete, it’s time to install the shallow lighting fixtures. Place the fixtures in the holes and secure them with the appropriate screws. Then, turn on the power and test the fixtures to ensure they work correctly.
The method of installation for various shallow lights may differ. For instance, some may need you to create holes in the ceiling, while others might be able to fit into pre-existing openings.
It is advised to use insulation barriers or baffles around the lights to ensure safety when installing shallow lights. This helps bring down the temperature and prevents insulation materials from getting too close to the wiring or light fixtures.
Additionally, using shallow light covers can be a helpful way to guarantee safety during the set-up and utilization of shallow lights.
Step 6: Make the Final Adjustments
Finally, you’ll want to adjust the fixtures to ensure maximum home illumination. Try to angle the fixtures in a way that will spread the light evenly throughout the room.
Consider using dimmer switches to give you more control over the illumination level. This will allow you to dim or brighten the lights depending on the mood you want to create.
Dimmers are available for different light fixtures, so you can find one compatible with your existing lighting system. Installing a dimmer switch is easy and can even be installed on 3-way switches or multiple-location circuits, allowing you to control the same light from multiple locations.
Conclusion
Always prioritize safety when setting up shallow lights. You wouldn't want an incident to happen, particularly if you are going to install the shallow lights on your own. However, if you do not have the know-how in this area, it is better to consult an electrician.
Four Bros Lighting has a diverse collection of CFL and LED lighting, both indoors and outdoors, for residential, commercial, and industrial. We always provide free shipping on all your orders. Shop now and let us illuminate your world!